Barka da zuwa gidajen yanar gizon mu!

Horizontal Masterbatch Production Line, Single Screw Plastic Extruder Machine

Takaitaccen Bayani:

Cikakkun Bayanan Bayanin Samfuran Tsara Tsara: Aikace-aikacen Screw Extruder guda ɗaya: Sake yin amfani da Fim ɗin Filastik na Pe Pp, Scrap Etc Garanti: Diamita Tsakanin Shekara ɗaya: 180mm Mota: 90kw Capacity: 200-400kg A kowace Sa'a Material: 38CrMoALA Tsawon Tsawon Tsayi na Jagora: 900 YD180 Single Screw Extruder Filler Masterbatch Machine Halayen ɗayan dunƙule extruder 1.High daidai akwatin gear tare da ikon sama da lodi, watsa mai santsi, ƙaramar amo 2.Sabuwar ƙirar ganga an ...


Cikakken Bayani

Tags samfurin

Cikakken Bayanin Samfur
Zane-zane: Single Screw Extruder Aikace-aikace: Sake sarrafa Fim ɗin Filastik Pe PP, Scrap da dai sauransu
Garanti: Shekara daya Diamita na Screw: mm 180
Motoci: 90kw Iyawa: 200-400kg a kowace awa
Abu: 38CrMoALA Tsawon Tsayin Tsakiya Na Screw: 900 mm

PE PP Masterbatch YD180 Single Screw Extruder Filler Masterbatch Machine

Halin guda dunƙule extruder
1.Akwatin madaidaicin kayan aiki tare da ikon sama da lodi, watsa mai santsi, ƙaramar amo
2.Sabuwar ganga da aka ƙera da dunƙule don tabbatar da rarraba kayan abu a cikin narkewa, ƙarancin narkewar zafin jiki da samarwa mai girma.
3.An yi dunƙule tare da daidaitattun daidaitattun daidaito yayin aiwatarwa.Bayan da iskar gas da nitride suka yi maganin ganga, tana da ƙarfi mai ƙarfi da juriya.Don abu na musamman, ana samun karafa biyu don ganga da sauransu.
4.Gangarorin sun sanyaya ta ƙasa tare da babban yanayin aiki na bebe, ƙarancin kulawa
5.PID zafin jiki ana sarrafa shi ta hanyar mitar kula da zafin jiki na Japan tare da tsayayye da ingantaccen zafin jiki.
6.Nau'in ƙirar ƙirar mutun biyu: nau'in hannu da nau'in hydraulic don sauƙin canzawa da adana lokaci.
7.ABB ko wani sanannen alamar sarrafa saurin Inverter don ƙarin kwanciyar hankali da kyakkyawan aikin injin da sauƙin aiki

Aikace-aikace na yau da kullun
Yin aiki don rini na albarkatun kasa na filastik, sake yin amfani da pellets na filastik daga fim, flake, scrap da robobin injiniya, kamar ABS, PC, POM, PP, PE, ABS/PC, PET da dai sauransu.

Babban ma'aunin fasaha na layin samarwa YD-180

1. Single dunƙule babban inji:

1) Diamita na dunƙule: ¢180mm, L/D: 28: 1,

2) An haɗa dunƙule zuwa akwatin gear ta hanyar spline mara kyau;

3) The dunƙule abu: 38CrMoALA, nitrogen hardening.Taurin saman shine HV 950-1050, zurfin Layer: 0.5-0.7 mm;da ganga kayan: 38CrMoALA, nitrogen hardening., Taurin saman shine HV 950-1050;zurfin Layer: 0.5-0.7 mm;

4) Babban ikon motar: 100 kw, (A / C) gudun yana kayyade ta mai kula da Italiya;dunƙule gudun 17-84rpm;

5) dumama ganga: simintin gyare-gyaren aluminum.Ƙarfin wutar lantarki: 60 kw, an raba zuwa yankuna 7, Shugaban na'ura shine yanki kuma wasu yankuna 8 ne.Sanyaya ta hanyar busa;

6) Akwatin kaya samfurin 250.Ana sarrafa saurin ta babban akwatin watsawa tare da babban juzu'i, da fuska mai wuyar kaya, ta amfani da SKF da aka shigo da shi, kayan kayan axial na gear shine 20CrNiMo, ta hanyar nutsewar carbon da dumama bi da, HRC60-63;

7) Amintaccen mai canza allo ta atomatik, yana aiki cikin sauƙi;

Shahararriyar alamar kayan lantarki ta duniya

1).Mitar sarrafa zafin jiki Jafananci neRKCmita, nau'in fasaha, tashoshi biyu;
2).Mai juyawa na extruder shine haɗin gwiwar JapanABB
3).Na'ura mai ƙarancin wuta da maɓalli sun ɗaukaSCHNEIDERsamfur;
4).AC contactor daukoSIEMENS samfur;
5).Babban motar shineSISMENS BEIDE;
6).Sauyin iska ya ɗaukaCHINT samfurori.Matsakaicin misalan jahohi sun fito ne daga alamar haɗin gwiwar Amurka;
7).Bawul ɗin lantarki yana ɗaukar DenmarkDANFOSS samfur.

Hoton sake yin amfani da PE PP YD150 Single Screw Extruder Filastik Pelletizing Machine
Horizontal Masterbatch Production Line, Single Screw Plastic Extruder Machine

Babban bayanan fasaha na nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan dunƙule guda ɗaya extruder palstic pelleitizing inji

Nau'in samfurin Diamita Tsararru (mm) Rufe L/D Babban ikon mota (Kw) gudun dunƙule n(r/min) Ƙarfin samarwa na yau da kullun (kg/h)
YD-30 30 25-33 4/5.5 3-100 2-15
YD-45 45 20-32 5.5/7.5 5-84 5-40
YD-60 60 20-32 17.5/22 5-84 15-80
YD-90 90 20-33 30/37 5-84 25-120
YD-100 100 20-33 37/45 5-84 45-150
YD-120 120 20-33 45/55 5-84 75-200
YD-150 150 20-33 75/90 5-84 150-300
YD-180 180 20-33 90/132 5-84 200-400
YD-200 200 20-33 110/160 5-84 250-500

Takaitaccen Kamfanin
Nanjing Yongjie Qixin Machinery Equipment Co., LtdKafa a 2001, maida hankali ne akan wani yanki na 20,000 murabba'in mita a kan namu ƙasar, tare da wata-wata fitarwa na inji 20sets.Our factory ne certificated zuwa AZ, ISO9001: 2008. The kamfanin mayar da hankali a kan bincike, ci gaba da kuma samar da "high matakin, m, sosai sophisticated jerin samfurin layi daya co-juya "cordwood" twin dunƙule extruder, guda dunƙule extruder, biyu mataki extruders da kuma na'urorin pelletizing filastik ta atomatik.Mun ba abokan ciniki samfuran farko-farko tare da “ƙarfi mai ƙarfi, haɓakar haɓakawa, adana makamashi da samfuran kare muhalli.The musamman tsara dunƙule tsarin ya samu nasara ga "daya mataki siffata" a kan da yawa irin kayayyakin, da aka yadu amfani a aluminum hada farantin, XPS kumfa farantin, WP farantin, PP, PE takardar masana'antu, da dai sauransu.
AN SANYA KYAU A FARKO, kuma mu factory ne certificated zuwaISO 9001: 2008kumaCE.


  • Na baya:
  • Na gaba:

  • Ku rubuta sakonku anan ku aiko mana