Nabata na webụsaịtị anyị!
English
BANNER3(1)
BANNER2(2)
BANNER1(4)
2-15kg/H 20mm Igwe ihe eji eme plastik emeghariri, igwe ihe eji emeputa ihe PVC 7 Mpaghara gosiputara onyonyo.
  • 2-15kg/H 20mm igwe anaghị agba nchara, igwe PVC Extruder 7 Mpaghara.
  • 2-15kg/H 20mm igwe anaghị agba nchara, igwe PVC Extruder 7 Mpaghara.
  • 2-15kg/H 20mm igwe anaghị agba nchara, igwe PVC Extruder 7 Mpaghara.
  • 2-15kg/H 20mm igwe anaghị agba nchara, igwe PVC Extruder 7 Mpaghara.

2-15kg/H 20mm igwe anaghị agba nchara, igwe PVC Extruder 7 Mpaghara.

Nkọwa dị mkpirikpi:

Nkọwa ngwaahịa zuru ezu screw chepụta: Ngwa ejima screw Extruder: Pvc, Abs, Pe, Pp etc Formula Tesitng Cooling System: Soft Non-inoic Distilled Water Screw&barrel Ihe: 38CrMoAL Nitridge Steel Barrel Dayameta: 22mm Barrel Ogologo: Capa 840mm h Feeder: 0.25kw 2-15kg / h 20mm Pvc Material ExtruderPVC Pelletizing Machine Yongjie Laboratory Obere extruder SJSL20 n'ọtụtụ ebe n'etiti ndị ahịa anyị nke mahadum, ụlọ ọrụ nyocha, na ụlọ ọrụ R & D depa ...


Budata dị ka PDF

Nkọwa ngwaahịa

Mkpado ngwaahịa

Nkọwa ngwaahịa zuru ezu
Nhazi screw: Ejima ịghasa Extruder Ngwa: Pvc, Abs, Pe, Pp etc Formula Tesitng
Sistemu jụrụ oyi: Mmiri Distilled dị nro na-abụghị nke inic Ihe mkpuchi & gbọmgbọm: 38CrMoAL Nitridge Steel
Dayameta Barrel: 22mm Ogologo Barrel: 840 mm
Ike: 2-10kg / h Onye nri: 0,25kw

2-15kg/h 20mm Pvc Ihe ExtruderPVC Pelletizing Machine
 
Yongjie laabu Obere extruder SJSL20 na ọtụtụ-eji n'etiti anyị ahịa nke mahadum, nnyocha center, na factory R&D ngalaba maka ule nke usoro, compounding wdg.
Nkọwa ngwa ngwa
Ike: 5.5kw
Dayameta nke ịghasa: 21.7mm
Ihe ịghasa: 38CrMoAL
Dayameta Barrel: 22mm
Ihe eji eme ihe: 38CrMoAL
Mmepụta: gburugburu 2-15kg / h
Ụzọ ịkpụ: eriri mmiri, eriri ikuku dị jụụ dịkwa
Akwụkwọ ikike: otu afọ
Oge nzipu: 45 ụbọchị mgbe nkwụnye ego gasịrị
Ike ikpo oku:16kw
Mpaghara kpo oku: 7 zones
Ogologo gbọmgbọm: 120*7=840mm
Ụdị njikwa:PID
2-15kg/H 20mm igwe anaghị agba nchara, igwe PVC Extruder 7 Mpaghara.
Igbe igbe
Ngwa nnyefe: Parallel tri-axial Ọdịdị bụ ngwakọta nke mbelata na matriks.Ihe eji eme ihe bụ alloy dị elu (20CrNi2Mo).Ejiri usoro ikpo ọkụ cimentation gwọọ ya, ọkwa ziri ezi nwere ike iru 6.Ọ na-ekwe nkwa na elu eze na-agba ọsọ dị elu, na-ebufe ibu,obere mkpọtụna elu torque.
Njikere ịnya ụgbọ ala: The ika nke axletree:Japanese NSK.
mmanu mmanu: Gear bearings na gia igbe ga-abụ nke mmanụ emikpu.Enwere mmanye hydraulic na ntinye aka na ngwa ngwa.
Na-ajụ oyi: mmanu jụrụ oyi na-anabata shei na tube nju oyi na usoro mmiri jụrụ oyi.
 
Ịghasa
Dayameta:￠21.7 mm
L/D:40:1
Ntuziaka ntụgharị: na-emekọ ọnụ
Ịghasa & ihe: W6Mo5Cr4V2(6542#) ígwè ọrụ dị elu nke a na-emeso ya site na usoro nkwụsị nke agụụ na ike nke elu bụHRC58-62.Molding site raara onwe ya nye egweri igwe.Ịdị ọcha dị mma karịa ngwaahịa sitere na usoro ọdịnala.
Isi axle:Ogo alloy ígwè dị elu40CrNiMonke nwere oke tenacity na ogologo oge.Agwọworo ya site n'usoro ike na iwe ọkụ.
 
gbọmgbọm
1).Nhazi:Nkembụngalaba na-arụ ọrụ maka isi nri, nanke isiiEdobere ngalaba maka ikuku ikuku, egbochiri ndị ọzọ.
2).Ihe onwunwe: Ihe nke gbọmgbọm38CrMoAlA, elu ike: HV950-1050, omimi 0.5-0.7mm 3).kpo oku: Nabata multiple nzọụkwụ format electric kpo oku.A na-atụba mpaghara niile ọkụ ọla kọpa.Ngụkọta ike kpo oku bụ16KWna ike kpo oku kacha nke ngalaba ọ bụla nwere ike iru
500 ℃.
4).Na-ajụ oyi: Nabata sistemu mmiri dị nro na gbọmgbọm wee kpatụ ụzọ jụrụ oyi na mpụga gbọmgbọm.The mgbasa ọkpọkọ na-mere nke igwe anaghị agba nchara na mmiri inflow regulating valves bụ igwe anaghị agba nchara.
The ika nke electromagnetic valve bụDANFOSS.
5).Ogologo:120*7=840mm
 
Ụdị ama ama nke ụwa nke akụrụngwa eletrọnịkị
1).Igwe njikwa okpomọkụ bụ JapaneseRKCmita, ụdị ọgụgụ isi, ọwa abụọ;
2).The inverter nke extruder bụABB;
3).Ngwa nke obere voltaji na bọtịnụ wereSCHNEIDERngwaahịa;
4).Onye na-ahụ maka AC inwereSIEMENSngwaahịa;
5).Isi moto bụSISMENS BEIDE;
6).Mgbanwe ikuku na-anabataCHINTngwaahịa.The siri ike-ala relays si American nkwonkwo venture ika;
7).The electromagnetic valvụ: were DenmarkDANFOSSngwaahịa.
 
Foto nkeLaboratory Mini Extruder PVC Pelletizing Machine Pvc Cable Extruder
2-15kg/H 20mm igwe anaghị agba nchara, igwe PVC Extruder 7 Mpaghara.
Main teknuzu data nke dị iche iche nlereanya nke ejima ịghasa extruder pelleitizing igwe

Ụdị ụdị Usoro Dayameta Barrel (mm) Dayameta ịghasa (mm) Mkpọsa L/D screw speed n(r/min) Ike moto (Kw) Screw torque T(Nm) Ọnụọgụ torque (T/A3) Ike mmepụta ihe (kg/h)
SJSL20 A/B 22 21.7 32-44 500/600 4/5.5kw 30/30    
SJSL-36 A/B/C/D 36 35.6 32-48 400/600 11/15/18.5/22 125-225 4.6-8.3 30-120
SJSL-51 A/B/C/D 51 50.5 32-52 500/600 45/55/75/90 405-680 5.1-8.5 120-400
SJSL-65 A/B/C/D 63 62.4 32-64 500/600 75/90/110/132 680-1200 4.8-8.5 180-750
SJSL-75 A/B/C/D 72 71 32-64 500/600 110/132/160/250 995-1890 4.6-8.7 300-1200
SJSL-95 A/B/C/D 94 93 32-64 500/600 250/315/450/550 2260-4510 4.7-8.7 700-2500
SJSL-135 A/B/C/D 135 133 32-48 400/500 550/750/900/1200 6200-10800 4.4-7.7 1550-6500

 
Nkọwa nke ụlọ ọrụ
Nanjing Yongjie Qixin Machinery Equipment Co., LtdTọrọ ntọala na 2001, na-ekpuchi ebe 20,000 square mita na ala anyị, na kwa ọnwa mmepụta nke igwe 20sets.Anyị factory na- certificated ka CE, ISO9001: 2008.The ụlọ ọrụ concentrates na nnyocha, mmepe na mmepụta nke "elu larịị, ezi, ukwuu ọkaibe usoro ngwaahịa yiri co-n'usoro "cordwood" ejima ịghasa extruder, otu ịghasa extruder, abụọ ogbo extruders na igwe pelletizing plastik akpaka.Anyị enyela ndị ahịa ngwaahịa klaasị mbụ na “oke ike, mmepụta dị elu, nchekwa ike na ngwaahịa nchekwa gburugburu ebe obibi.Usoro ihe nkedo a haziri nke ọma arụpụtala nke ọma maka “otu nzọụkwụ n'ịkpụzi” n'ọtụtụ ụdị ngwaahịa, a na-ejikwa ya na efere aluminom mejupụtara, efere ụfụfụ XPS, efere WP, PP, ụlọ ọrụ mpempe akwụkwọ PE, wdg.

 
Kedu otu esi ahọrọ igwe maka pellet plastik?
1. Naanị gwa anyị usoro gị siri ike?
2. Mmepụta gị tụrụ anya kwa elekere nke igwe

  • Nke gara aga:
  • Osote:
    • Dee ozi gị ebe a ziga anyị ya

    Ụdị ngwaahịa

    Pịa tinye ka ịchọọ ma ọ bụ ESC mechie