Nabata na webụsaịtị anyị!

Abrasion Resistance Single Screw Plastic Extruder Machine Hastelloy Material

Nkọwa dị mkpirikpi:

Nkọwa ngwaahịa zuru ezu screw Design: Single Screw Extruder Application: PE PP PVC PA Recycling Material etc Warranty: One Year Screw Diameter: 50mm Motor: 22kw Capacity: 50-70kg Per Hour Material: Hastelloy Central Height Of Screw: 900 Mm 50-70k Hour Plastic Recycling Granulator Machine Single Screw Extruder Machine Characteristic of Yongjie single screw extruder 1.High precision gear igbe na ikike nke n'elu loading, ire ụtọ transmitting, ala mkpọtụ 2.Newly e mere ...


Nkọwa ngwaahịa

Mkpado ngwaahịa

Nkọwa ngwaahịa zuru ezu
Nhazi screw: Otu ịghasa Extruder Ngwa: PE PP PVC PA ihe eji emegharị ihe wdg
Akwụkwọ ikike: Otu afọ Dayameta skru: 50mm
moto: 22kw Ike: 50-70kg kwa elekere
Ihe: Hastelloy Central Height of Screw: 900 mm

50-70kg kwa elekere igwe eji emeghari igwe eji emeghari iheIgwe ihe nkedo nke otu Screw Extruder

Njirimara nke Yongjie otu ịghasa extruder
1.Igbe nkenke gia dị elu nwere ikike nke ibu ibu, nnyefe dị nro, mkpọtụ dị ala
2.gbọmgbọm na ịghasa emebere ọhụrụ iji hụ na ekesara nke ọma ihe na agbaze, obere agbaze okpomọkụ na mmepụta dị elu.
3.A na-eji ọkọlọtọ na nkenke dị elu mee ihe nkedo ahụ n'oge usoro.Mgbe gas na nitride gwọchara ya, ọ na-enwe ike eyi ike na mgbochi corrosion.Maka ihe pụrụ iche, ọla abụọ dị maka gbọmgbọm wdg.
4.A na-eme ka gbọmgbọm ndị ahụ dị jụụ site na iji ọnọdụ arụ ọrụ dị oke ogbi, obere mmezi
5.PID na-ejikwa mita okpomọkụ nke Japan nwere ọnọdụ okpomọkụ kwụsiri ike na nke ziri ezi.
6.Ụdị ụdị isi ọnwụ abụọ: akwụkwọ ntuziaka na ụdị hydraulic maka mgbanwe dị mfe na ịchekwa oge.
7.ABB ma ọ bụ akara ọsọ Inverter ama ama ama ama maka igwe kwụsiri ike ma dị mma yana ịrụ ọrụ dị mfe
 
Ngwa a na-ahụkarị
Na-arụ ọrụ maka ihe eji esiji ihe eji eme ihe, na-emegharị pellets plastik site na fim, flake, scrap na plastik engineering, dị ka ABS, PC, POM, PP, PE, ABS / PC, PET wdg.
 
Isi oru oke nke YD-50 mmepụta ahịrị

a.L/D:25:1

b.Dayameta nke ịghasa: ¢50mm

c.Ihe ịghasa: Hastelloy С-276: Ni (57);Co (2.50; Cr (16); Mo (16); W (40; FE 95); Si (0.08); Mn (1); C (0.01); Al (0.35), ezigbo mgbochi corrision

d.ihe e ji agba gbọmgbọm: Hastelloy С-276: Ni (57);Co (2.50; Cr (16); Mo (16); W (40; FE 95); Si (0.08); Mn (1); C (0.01); Al (0.35), ezigbo mgbochi corrision

z e. ịghasa elu nke etiti 900 mm,

f.Ogologo mpempe akwụkwọ: 1250 mm

g.Igwe ọkụ gbọmgbọm: nkedo- Aluminom.Ike ikpo ọkụ: 27 KW, kewara na mpaghara 4, enwere ike ịchịkwa ya iche, nwere otu mpaghara okpomọkụ na isi ebu, mkpokọta 5 kpo oku.Igwe ọkụ ọkụ: 0-400 ℃

Enwere oghere ikuku na gbọmgbọm ahụ.

h. A na-achịkwa ọsọ ọsọ site na isi igbe mgbasa ozi nwere oke torque, na ihu ihu siri ike, na-eji SKF ebubata ibubata, ihe nke axial gear bụ 20CrNiMo, site na immerse carbon na kpo oku mesoo, HRC60-63;

i.Isi moto ike: 22 KW, AC moto, Yolico inverter na-achịkwa ọsọ;ịghasa ọsọ: 0-58 rpm.

 

Ọrụ tupu ire ere
♦1.Ajụjụ na nkwado ndụmọdụ.

♦2.Ịhọrọ akụ na ụba na adabara extruder na igwe ndị metụtara ya maka ndị ahịa.
♦3.Na-enye nkọwa teknụzụ nke igwe.
♦4.Na-enye ụzọ nke ịrụ ọrụ nnwale maka ndị ahịa.

♦ 5. Njem ụlọ ọrụ & enyemaka nke akwụkwọ ịkpọ òkù mgbe ọ dị mkpa.
Ọrụ ire ere
♦ 1. Na-atụ aro ọnọdụ injinia chọrọ maka nrụnye.
♦ 2. Na-ekwurịta okwu n'oge ọnọdụ nrụpụta nke igwe.
Mgbe-ahịa ọrụ
♦ 1. Ndị injinia dị maka igwe ọrụ na mba ofesi na ntinye, ntinye na ọzụzụ.
♦ 2. Ịdebanye n'ụzọ zuru ezu ozi iji ndị ahịa.
♦ 3. Na-enye ọrụ nlekọta ogologo oge na ihe ndị ọzọ.
♦ 4. Inye nkwado teknụzụ maka ndị ahịa maka ịmepụta ngwaahịa ọhụrụ.
♦ 5. Na-enye nlekọta n'efu maka otu afọ.

Foto nke otu skru extruder plastic pellet mahcine

Abrasion Resistance Single Screw Plastic Extruder Machine Hastelloy Material
 
Isi teknụzụ data nke ụdị dị iche iche nke otu ịghasa extruder palstic pelleitizing igwe

Ụdị ụdị Dayameta ịghasa (mm) Mkpọsa L/D Ike moto (Kw) screw speed n(r/min) Ike mmepụta ihe (kg/h)
YD-30 30 25-33 4/5.5 3-100 2-15
YD-45 45 20-32 5.5 / 7.5 5-84 5-40
YD-60 60 20-32 17.5/22 5-84 15-80
YD-90 90 20-33 30/37 5-84 25-120
YD-100 100 20-33 37/45 5-84 45-150
YD-120 120 20-33 45/55 5-84 75-200
YD-150 150 20-33 75/90 5-84 150-300
YD-180 180 20-33 90/132 5-84 200-400
YD-200 200 20-33 110/160 5-84 250-500

 
Nkọwa nke ụlọ ọrụ
Nanjing Yongjie Qixin Machinery Equipment Co., LtdTọrọ ntọala na 2001, na-ekpuchi ebe 20,000 square mita na ala anyị, na kwa ọnwa mmepụta nke igwe 20sets.Ụlọ ọrụ anyị bụ akwụkwọ CE, ISO9001:2008.
The ụlọ ọrụ concentrates na nnyocha, mmepe na mmepụta nke "elu larịị, ezi, ukwuu ọkaibe usoro ngwaahịa parallel co-rotating"cordwood" ejima ịghasa extruder, otu ịghasa extruder, abụọ ogbo extruders na akpaka plastic pelletizing igwe.Anyị enyela ndị ahịa ngwaahịa klaasị mbụ na “oke ike, mmepụta dị elu, nchekwa ike na ngwaahịa nchekwa gburugburu ebe obibi.Usoro ihe nkedo a haziri nke ọma arụpụtala nke ọma maka “otu nzọụkwụ n'ịkpụzi” n'ọtụtụ ụdị ngwaahịa, a na-ejikwa ya na efere aluminom mejupụtara, efere ụfụfụ XPS, efere WP, PP, ụlọ ọrụ mpempe akwụkwọ PE, wdg.

AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊA Mbụ, na anyị factory bụ certificated kaISO 9001: 2008naCE.

 Ngwugwu igwe
1. Oké osimiri kwesiri ihe nkiri ma ọ bụ ihe nkiri afụ
2. Igbe osisi ma ọ bụ etiti dị ka ihe ndị ahịa chọrọ


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya