Ngwa PA + Glass Mkwado Ejima Screw Extruder Machine nwere Sistemụ Vacuum Venting
| Nhazi screw: | Ejima ịghasa Extruder | Ngwa: | PA + 15-35% Glass |
|---|---|---|---|
| Akwụkwọ ikike: | Otu afọ | Ndị injinia si mba ofesi: | Dị maka ntinye na ntinye |
| Dayameta skru: | 62.4mm | moto: | 90kw |
| Mpụta: | Ihe dị ka 300kg / h | L/D: | 40:1 |
SJSL65B PA+Glass Nkwado Ejima Screw Extruder Machine Plastic Pellet Ime Line
Nkọwa ngwa ngwa
Ike:90kw
dayameta nke ịghasa: 62.4mm
Dayameta Barrel: 63mm
L/D:40:1 maka PA+glass, maka fiberglass na-abụghị nke etinyere, enwere oghere na gbọmgbọm ejima screw extruder anyị iji zụọ ya.
Maka fiberglass gbuturu, a na-achọkarị feeder akụkụ pụrụ iche iji tinye ha.
Ọtụtụ mgbe, fiberglass tinye bụ 15% -35%, ụfọdụ ndị ahịa nwere ike itinyekwu ihe, dị ka 50% wdg, igwe anyị nwere ike izute usoro dị iche iche chọrọ.
Mmepụta: 300kg / h
Ụzọ ịkpụ: eriri mmiri maka plastik injinia
Akwụkwọ ikike: otu afọ
Oge nzipu: 45 ụbọchị mgbe nkwụnye ego gasịrị
A na-eji eriri mmiri anyị ejima ịghasa extruder eme ihe maka akụrụngwa injinia dị ka PA, ABS, PC, PMMA, POM, PBT, PET wdg.
Oke nke ọkọnọ
| Mba. | ọdịnaya | Nkeji | Ọnụọgụ | Akara |
| 1 | Ejima ịghasa extrusion usoro | setịpụrụ | 1 | |
| 1.1 | Usoro nri | setịpụrụ | 1 | 1,5kw |
| 1.2 | SJ-65BTwin ịghasa extruder | setịpụrụ | 1 | 90kw, 40:1 |
| 1.3 | Sistemụ ikuku ikuku | setịpụrụ | 1 | 2,2kw |
| 1.4 | Usoro ịgba ígwè mmiri | setịpụrụ | 1 | 0,55kw |
| 1.5 | Ihe ngbanwe ihuenyo akpaaka | setịpụrụ | 1 | 1,5kw |
| 2 | Igwe ọkụ eletrik | setịpụrụ | 1 | PID |
| 3 | Usoro inyeaka mmiri-eriri | setịpụrụ | 1 | |
| 3.1 | Nwuo isi | setịpụrụ | 1 | |
| 3.2 | Ebe akwa mmiri | setịpụrụ | 1 | 4M |
| 3.3 | Drier | setịpụrụ | 1 | 2,2kw |
| 3.4 | Pelletizer | setịpụrụ | 1 | 300kg / h, 4kw |
| 4 | Akwụkwọ | setịpụrụ | 1 |
Foto nke igwe ejima ịghasa extruder SJSL65B
Main teknuzu data nke dị iche iche nlereanya nke ejima ịghasa extruder pelleitizing igwe
| Ụdị ụdị | Usoro | Dayameta Barrel (mm) | Dayameta ịghasa (mm) | Mkpọsa L/D | screw speed n(r/min) | Ike moto (Kw) | Screw torque T(Nm) | Ọnụọgụ torque (T/A3) | Ike mmepụta ihe (kg/h) |
| SJSL-36 | A/B/C/D | 36 | 35.6 | 32-48 | 400/600 | 11/15/18.5/22 | 125-225 | 4.6-8.3 | 30-120 |
| SJSL-51 | A/B/C/D | 51 | 50.5 | 32-52 | 500/600 | 45/55/75/90 | 405-680 | 5.1-8.5 | 120-400 |
| SJSL-65 | A/B/C/D | 63 | 62.4 | 32-64 | 500/600 | 75/90/110/132 | 680-1200 | 4.8-8.5 | 180-750 |
| SJSL-75 | A/B/C/D | 72 | 71 | 32-64 | 500/600 | 110/132/160/250 | 995-1890 | 4.6-8.7 | 300-1200 |
| SJSL-95 | A/B/C/D | 94 | 93 | 32-64 | 500/600 | 250/315/450/550 | 2260-4510 | 4.7-8.7 | 700-2500 |
| SJSL-135 | A/B/C/D | 135 | 133 | 32-48 | 400/500 | 550/750/900/1200 | 6200-10800 | 4.4-7.7 | 1550-6500 |
Nkọwa nke ụlọ ọrụ
Nanjing Yongjie Qixin Machinery Equipment Co., LtdTọrọ ntọala na 2001, na-ekpuchi ebe 20,000 square mita na ala anyị, na kwa ọnwa mmepụta nke igwe 20sets.Anyị factory na- certificated ka CE, ISO9001: 2008.The ụlọ ọrụ concentrates na nnyocha, mmepe na mmepụta nke "elu larịị, ezi, ukwuu ọkaibe usoro ngwaahịa yiri co-n'usoro "cordwood" ejima ịghasa extruder, otu ịghasa extruder, abụọ ogbo extruders na igwe pelletizing plastik akpaka.Anyị enyela ndị ahịa ngwaahịa klaasị mbụ na “oke ike, mmepụta dị elu, nchekwa ike na ngwaahịa nchekwa gburugburu ebe obibi.Usoro ihe nkedo a haziri nke ọma arụpụtala nke ọma maka “otu nzọụkwụ n'ịkpụzi” n'ọtụtụ ụdị ngwaahịa, a na-ejikwa ya na efere aluminom mejupụtara, efere ụfụfụ XPS, efere WP, PP, ụlọ ọrụ mpempe akwụkwọ PE, wdg.
Kedu otu esi ahọrọ igwe maka pellet plastik?
1. Naanị gwa anyị usoro gị siri ike?
2. Mmepụta gị tụrụ anya kwa elekere nke igwe
