Nabata na webụsaịtị anyị!
English
BANNER3(1)
BANNER2(2)
BANNER1(4)
50-80kg kwa elekere Plastic recycling granulator Machine PID Control 25kw moto egosipụtara onyonyo
  • 50-80kg kwa elekere Plastic recycling granulator Machine PID Control 25kw moto
  • 50-80kg kwa elekere Plastic recycling granulator Machine PID Control 25kw moto
  • 50-80kg kwa elekere Plastic recycling granulator Machine PID Control 25kw moto
  • 50-80kg kwa elekere Plastic recycling granulator Machine PID Control 25kw moto

50-80kg kwa elekere Plastic recycling granulator Machine PID Control 25kw moto

Nkọwa dị mkpirikpi:

Nkọwa ngwaahịa zuru ezu screw Design: Single Screw Extruder Application: PE PP PVC PA Recycling Material etc Warranty: One Year Screw Diameter: 50mm Motor: 25kw Capacity: 50-80kg Kwa hour Material: 38CrMoAIA Central Height of Screw: 900-8Mm 5k Hour Plastic Recycling Film Granulator Machine Single Screw Extruder Machine Characteristic of Yongjie single screw extruder 1.High precision gear igbe na ikike nke n'elu loading, ire ụtọ transmitting, ala mkpọtụ 2.Newly des ...


Budata dị ka PDF

Nkọwa ngwaahịa

Mkpado ngwaahịa

Nkọwa ngwaahịa zuru ezu
Nhazi screw: Otu ịghasa Extruder Ngwa: PE PP PVC PA ihe eji emegharị ihe wdg
Akwụkwọ ikike: Otu afọ Dayameta skru: 50mm
moto: 25kw Ike: 50-80kg kwa elekere
Ihe: 38CrMoAIA Central Height of Screw: 900 mm

50-80kg kwa elekere igwe eji emegharị ihe nkiri granulatorIgwe ihe nkedo nke otu Screw Extruder

Njirimara nke Yongjie otu ịghasa extruder
1.Elu nkenkegiaigbe nwere ikike nke n'elu loading, ezigbo nnyefe, obere mkpọtụ
2.gbọmgbọm na ịghasa emebere ọhụrụ iji hụ na ekesara nke ọma ihe na agbaze, obere agbaze okpomọkụ na mmepụta dị elu.
3.A na-eji ọkọlọtọ na nkenke dị elu mee ihe nkedo ahụ n'oge usoro.Mgbe gas na nitride gwọchara ya, ọ na-enwe ike eyi ike na mgbochi corrosion.Maka ihe pụrụ iche, ọla abụọ dị maka gbọmgbọm wdg.
4.A na-eme ka gbọmgbọm ndị ahụ dị jụụ site na iji ọnọdụ arụ ọrụ dị oke ogbi, obere mmezi
5.PID na-ejikwa mita okpomọkụ nke Japan nwere ọnọdụ okpomọkụ kwụsiri ike na nke ziri ezi.
6.Ụdị ụdị isi ọnwụ abụọ: akwụkwọ ntuziaka na ụdị hydraulic maka mgbanwe dị mfe na ịchekwa oge.
7.ABB ma ọ bụ akara ọsọ Inverter ama ama ama ama maka igwe kwụsiri ike ma dị mma yana ịrụ ọrụ dị mfe
  
Nkọwa ngwa ngwa

a.L/D:25:1

b.Dayameta nke ịghasa: ￠50mm

c.Ihe ịghasa: Hastelloy С-276: Ni (57);Co (2.50; Cr (16); Mo (16); W (40; FE 95); Si (0.08); Mn (1); C (0.01); Al (0.35), ezigbo mgbochi corrision

d.ihe e ji agba gbọmgbọm: Hastelloy С-276: Ni (57);Co (2.50; Cr (16); Mo (16); W (40; FE 95); Si (0.08); Mn (1); C (0.01); Al (0.35), ezigbo mgbochi corrision

z e. ịghasa elu nke etiti 900 mm,

f.Ogologo mpempe akwụkwọ: 1250 mm

g.Igwe ọkụ gbọmgbọm: nkedo- Aluminom.Ike ikpo ọkụ: 27 KW, kewara na mpaghara 4, enwere ike ịchịkwa ya iche, nwere otu mpaghara okpomọkụ na isi ebu, mkpokọta 5 kpo oku.Okpomọkụ okpomọkụ: 0-400 ℃. E nwere degassing onu na gbọmgbọm.

h. A na-achịkwa ọsọ ọsọ site na isi igbe mgbasa ozi nwere oke torque, na ihu ihu siri ike, na-eji SKF ebubata ibubata, ihe nke axial gear bụ 20CrNiMo, site na immerse carbon na kpo oku mesoo, HRC60-63;

i.Isi moto ike: 22 KW, AC moto, Yolico inverter na-achịkwa ọsọ;ịghasa ọsọ: 0-58 rpm.

 

  Oke nke ọkọnọ

Mba. Ọdịnaya UNIT Ọnụọgụgụ IHE
1 YD-50 otu ịghasa isi igwe setịpụrụ 1 22kw,25:1
1.1 Onye nri setịpụrụ 1  
1.2 Ihe ngbanwe ihu igwe hydraulic setịpụrụ 1 1,5kw
2 Usoro njikwa eletriki setịpụrụ 1 PID
3 Mmiri eriri ọnwụ igwe inyeaka setịpụrụ 1  
3.1 Nwuo isi setịpụrụ 1  
3.2 Ebe akwa mmiri setịpụrụ 1 3M
3.3 Drier setịpụrụ 1 1,5kw
3.4 Pelletizer Tọọ 1 2.2kw, 100kg / h
4 Akụkụ mapụtara Tọọ 1  
5 Akwụkwọ setịpụrụ 1  

 

Foto nke otu skru extruder plastic pellet mahcine

50-80kg kwa elekere Plastic recycling granulator Machine PID Control 25kw moto
 
Isi teknụzụ data nke ụdị dị iche iche nke otu ịghasa extruder palstic pelleitizing igwe

Ụdị ụdị Dayameta ịghasa (mm) Mkpọsa L/D Ike moto (Kw) screw speed n(r/min) Ike mmepụta ihe (kg/h)
YD-30 30 25-33 4/5.5 3-100 2-15
YD-45 45 20-32 5.5 / 7.5 5-84 5-40
YD-60 60 20-32 17.5/22 5-84 15-80
YD-90 90 20-33 30/37 5-84 25-120
YD-100 100 20-33 37/45 5-84 45-150
YD-120 120 20-33 45/55 5-84 75-200
YD-150 150 20-33 75/90 5-84 150-300
YD-180 180 20-33 90/132 5-84 200-400
YD-200 200 20-33 110/160 5-84 250-500

 
Nkọwa nke ụlọ ọrụ
Nanjing Yongjie Qixin Machinery Equipment Co., LtdTọrọ ntọala na 2001, na-ekpuchi ebe 20,000 square mita na ala anyị, na kwa ọnwa mmepụta nke igwe 20sets.Ụlọ ọrụ anyị bụ akwụkwọ CE, ISO9001:2008.
The ụlọ ọrụ concentrates na nnyocha, mmepe na mmepụta nke "elu larịị, ezi, ukwuu ọkaibe usoro ngwaahịa parallel co-rotating"cordwood" ejima ịghasa extruder, otu ịghasa extruder, abụọ ogbo extruders na akpaka plastic pelletizing igwe.Anyị enyela ndị ahịa ngwaahịa klaasị mbụ na “oke ike, mmepụta dị elu, nchekwa ike na ngwaahịa nchekwa gburugburu ebe obibi.Usoro ihe nkedo a haziri nke ọma arụpụtala nke ọma maka “otu nzọụkwụ n'ịkpụzi” n'ọtụtụ ụdị ngwaahịa, a na-ejikwa ya na efere aluminom mejupụtara, efere ụfụfụ XPS, efere WP, PP, ụlọ ọrụ mpempe akwụkwọ PE, wdg.
AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊA Mbụ, na anyị factory bụ certificated kaISO 9001: 2008naCE.

 
Ngwugwu igwe
1. Oké osimiri kwesiri ihe nkiri ma ọ bụ ihe nkiri afụ
2. Igbe osisi ma ọ bụ etiti dị ka ihe ndị ahịa chọrọ

  • Nke gara aga:
  • Osote:
    • Dee ozi gị ebe a ziga anyị ya

    Ụdị ngwaahịa

    Pịa tinye ka ịchọọ ma ọ bụ ESC mechie