Mochini o le Mong oa Screw Plastic Recycling Film Granulator Machine Extruder Machine 30-50kg ka Hora

Litšobotsi tsa Yongjie single screw extruder

1. Lebokose la lisebelisoa tse nepahetseng tse phahameng tse nang le bokhoni ba ho kenya ho feta, phetisetso e boreleli, lerata le tlase
2. Moqomo le sekoti se sa tsoa etsoa ho netefatsa hore thepa e ajoa hantle ka ho qhibiliha, mocheso o tlase o qhibilihang le tlhahiso e phahameng.
3. The screw e entsoe ka mokhoa o tloaelehileng le o nepahetseng haholo nakong ea ts'ebetso.Ka mor'a ho phekoloa ka likhase le nitride barrel, e na le matla a ho senya le ho thibela ho bola.Bakeng sa thepa e khethehileng, litšepe tse peli li fumaneha bakeng sa barrel joalo-joalo.
4. Libarele li ne li pholile ka tlase ka boemo ba ho sebetsa bo sa bueng haholo, tlhokomelo e fokolang
5. Mocheso oa PID o laoloa ke mitha ea taolo ea mocheso ea Japane e nang le mocheso o tsitsitseng le o nepahetseng.
6. Mefuta e 'meli ea moralo oa hlooho ea lefu: mofuta oa tataiso le oa hydraulic bakeng sa ho fetoha habonolo le ho boloka nako.
7. ABB kapa taolo e 'ngoe e tsebahalang ea inverter ea brand bakeng sa ts'ebetso e tsitsitseng le e ntle ea mochini le ts'ebetso e bonolo
  
Lintlha tse potlakileng
a.L/D:25:1
b.Bophara ba Screw: ￠50mm
c.Thepa ea screw: Hastelloy С-276: Ni (57);Co (2.50; Cr (16); Mo (16); W (40; FE 95); Si (0.08); Mn (1); C (0.01); Al (0.35), anti-corrision e ntle

d.thepa ea moqomo: Hastelloy С-276: Ni (57);Co (2.50; Cr (16); Mo (16); W (40; FE 95); Si (0.08); Mn (1); C (0.01); Al (0.35), anti-corrisionz e ntle

e.bophahamo ba sekoti bohareng ba 900 mm,

f.Bolelele ba moqomo: ～1250 mm

g.Libarele heater: cast- Aluminium.Matla a ho futhumatsa: 27 KW, e arotsoe ka libaka tse 4, e ka laoloa ka thoko, e na le sebaka se le seng sa mocheso hloohong ea hlobo, sebaka sa ho futhumatsa sa 5 kaofela.Mocheso oa ho futhumatsa: 0-400 ℃ Ho na le lesoba la ho ntša metsi holim'a moqomo.

h.Lebelo le laoloa ke lebokose le ka sehloohong la phetisetso le nang le torque e phahameng, le sefahleho sa gear se thata, ho sebelisa SKF e tsoang linaheng tse ling, thepa ea gear axial ke 20CrNiMo, ka ho qoelisa carbon le ho futhumatsa ho tšoaroa, HRC60-63;ke.Matla a mantlha a enjene: 22 KW, enjene ea AC, Inverter ea Yolico ho laola lebelo;lebelo la screw: 0-58 rpm.

    
Taolo ya interlock
1).Enjene ea extruder e thehile moroalo oa hona joale ho fihlela ts'ireletso ea ketane ea ho koala ka khabinete ea taolo ea motlakase.
2).Sistimi ea taolo ea mochini o moholo oa mochini e hokahane le sistimi ea taolo ea mochini o fepang e le mokhoa oa ts'ireletso ka bobeli.
3).Lebokose la li-gearbox le sistimi ea lubrication li hokahane bakeng sa ts'ireletso.
4).The extruder e thehile khatello e feteletseng ho fihlela ts'ireletso ea ketane ea ho koala ka khabinete ea taolo ea motlakase.
5).Enjene e kholo e hokahane le phini ea nylon ea lebokose la gear e le hore e khaole phini ea nylon ha torque e tletse.

 
Senepe sa single screw extruder plastic pellet mahcine
 
Lintlha tsa mantlha tsa tekheniki tsa mofuta o fapaneng oa mochini o le mong oa screw extruder palstic pelleitizing