30-80kg/h YD70 Single Screw Extruder Machine Waste Plastic Granulator Factory
 

Characteristic of Yongjie single screw extruder
1.High precision gear box with ability of over loading, smooth transmitting, lower noise
2.Newly designed barrel and screw to ensure well-distributed of material in melting, low melt temperature and high production
3.The screw is made with standard and high precision during process. After treated by gases and nitride the barrel, it possesses strong wear- and corrosion- resisting. For special material, double metals are available for barrel etc.
4.The barrels cooled by lower with super mute working status, less maintenance
5.PID temperature is controlled by Japan temperature control meter with stable and accurate temperature.
6.Two type of die head design: manual and hydraulic type for easy changing and time saving.
7.ABB or other famous brand Inverter speed control for more stable and good performance of machine and easier operation
 
Main technical parameter of YD-70 production line

1. The machine L/D=33:1
2. Screw diameter: ￠70mm;
3. Screw material:38CrMoALA,
4. Barrel material: 38CrMoALA;
5. Central height of the screw:900 mm;
6. Length of the barrel: 1860 mm
7. Heat-resistant capacity of heat sensor in main machine:0-500℃
8. Main motor power: 15kw;
9. Input rotating speed: 1480 rpm;
10. Output rotating speed: 90 rpm;
11. Heating power: 22KW;
12. The output : around 30- 50kg/h, (It can be changed according to different materials and technique)

3. Water and power engineering for the machine:

A. Electric equipment:

1. Electric frequency: 60Hz, Voltage: 220 V
2. Complete power capacity: 80KW;
3. Power consumption: 40~60KW;
4. Wire requested: 3×50m㎡(main wire) + 1×25 m㎡ (0 wire) + 1× 16 m㎡ (ground wire)

B. Total weight of the machine:

a. Main machine : 3 T;

b. Others: ﹤ 1 T;

Photo of single screw extruder plastic pellet mahcine
      

    Main technical data of various model of single screw extruder palstic pelleitizing machine