PE PP Masterbatch YD180 Single Screw Extruder Filler Masterbatch Machine

Characteristic of single screw extruder
1.High precision gear box with ability of over loading, smooth transmitting, lower noise
2.Newly designed barrel and screw to ensure well-distributed of material in melting, low melt temperature and high production
3.The screw is made with standard and high precision during process. After treated by gases and nitride the barrel, it possesses strong wear- and corrosion- resisting. For special material, double metals are available for barrel etc.
4.The barrels cooled by lower with super mute working status, less maintenance
5.PID temperature is controlled by Japan temperature control meter with stable and accurate temperature.
6.Two type of die head design: manual and hydraulic type for easy changing and time saving.
7.ABB or other famous brand Inverter speed control for more stable and good performance of machine and easier operation

Typical Application
Working for plastic raw material dye, recycling plastic pellets from film, flake, scrap and engineering plastics, such as ABS, PC, POM, PP, PE, ABS/PC, PET etc.

Main technical parameter of YD-180 production line

1. Single screw main machine:

1) Screw diameter: ￠180mm, L/D: 28:1,

2) The screw are connected to the gear box through involute spline;

3) The screw material: 38CrMoALA, nitrogen hardening. The hardness of the surface is HV 950-1050, deep layer: 0.5-0.7 mm; the barrel material: 38CrMoALA, nitrogen hardening. , the hardness of the surface is HV 950-1050; deep layer: 0.5-0.7 mm;

4) Main motor power: 100 kw, (A/C) speed is regulated by Italy regulator; screw speed 17-84rpm；

5) Barrel heating: cast- Aluminum heater. Heating power: 60 kw, divided to 7 zones, The machine head is a zone and others are 8 zones. Cooling by blowing way;

6) Adopted 250 model gear box. The speed is controlled by main transmission box with high torque, and hard gear face, using SKF imported bearing, material of the gear axial is 20CrNiMo, by immerse carbon and heating treated, HRC60-63;

7) Adopted automatic screen changer, operating easily;

World famous brand of electronic components

1). Temperature control meter is Japanese RKC meter, intelligent type, double channel;
2). The inverter of extruder is Japanese joint venture ABB
3). The low-voltage apparatus and the button adopt SCHNEIDER product;
4). AC contactor adopt SIEMENS product;
5). The main motor is SISMENS BEIDE;
6). The air switch adopts CHINT products. The solid-state relays are from American joint venture brand;
7). The electromagnetic valve adopt Denmark DANFOSS product.

Photo of Recycling PE PP YD150 Single Screw Extruder Plastic Pelletizing Machine

Main technical data of various model of single screw extruder palstic pelleitizing machine